View Larger Image   Millers Falls No. 79 Yankee Push Drill w/7 bits Rare!   Description: This is a very rare, hard to find 1920's era, Yankee type push drill with 7 drill points! This particular model has a combination of both the rotating bit storage selector, and the hardwood handle. Unique, we have seen very few of these over the past 10 years! The drill points each store in the handle in their own compartment, that is marked for each of the 7 different sizes (missing the 1/16" size) on the side of the metal section of the handle, which is an improvement over the earlier model, all wood handle with no storage. The handle is in very good solid, firmly attached condition, with some plating wear, and some minor wood finish wear, but overall the handle section is in great shape. The drill points are the same as the North Brothers, YANKEE brand drill points and later Stanley Tools push drills used, and have the notch and flat on the shanks, all in very good to new condition. The shafts are nickel plated brass, and the screw type chuck is steel. The chuck is basically the same as the North Brothers Yankee chucks in design, with some minor different, but the drill points are the same. The chuck works just fine, and is in great shape. This is not a screwdriver, it was designed to drill only. It is 10.5" long overall, and is marked on the handle ferrule "MILLERS FALLS CO. MILLERS FALLS MASS. MADE IN U.S.A. NO. 79". There is some wear on the nickel plating on the spiral shaft, and as you can see in the pictures about 50% is worn off. One of the issues with the Millers Falls push drills from the era, is that they left the pin that holds the chuck in place in the spiral shaft sticks up a tiny amount, and when the pin reaches the next larger shaft during use, the pin head leaves a small ding on the very edge of that larger tube it hits slightly. Most all M.F. drills from this era have this tiny ding in the same place, considered minor, but need to mention it as this is a used push drill. One of the most rare push drill models from Millers Falls! Nice!     Contact:   Great Expectations Antiques Seller:   Dealer/Mall    View Seller's Policy Seller Accepts:   We accept VISA, MASTER CARD, AMERICAN EXPRESS, PAYPAL, CASH, US POST OFFICE POSTAL MONEY ORDERS ONLY (ALL OTHER MONEY ORDERS WILL BE RETURNED), AND PERSONAL CHECKS. To order please click on the easy to use shopping cart. **INTERNATIONAL CUSTOMERS**PAYMENT BY CREDIT CARD PREFERRED** WE ONLY ACCEPT INTERNATIONAL POST OFFICE POSTAL MONEY ORDERS - PURCHASED AT YOUR GOVERNMENT POST OFFICE - IN US DOLLARS - ALL OTHER MONEY ORDERS WILL BE RETURNED. **ALL INTERNATIONAL CUSTOMS FEES, DUTIES, TAXES, BROKERAGE FEES ARE TO BE PAID BY THE BUYER**     Price:   $100.00  USD   Convert Currency Quantity Available:   1 Est. Shipping:   $7.00 USD Ship Internationally:   Yes   (Quoted at time of purchase) Shipping Paid By:   Buyer     Reference #:   T22705 Condition:   Good+ Circa:   1920's-30's Maker:   Millers Falls Co. Additional photos

Average Visitor Rating:    0.00 (out of 5)
Number of Ratings: 0 Votes

LOT of 19 MILLERS FALLS FLUTED SHANK PUSH DRILL POINT BIT GOODELL-PRATT

$40.00

Vintage Millers Falls 188a Automatic Yankee Push Drill W/ 8 drill point set

$34.95

Stanley USA Yankee Push Drill No. 41 w/ 9 Bits Vintage Storage Handle Chrome .

$29.36

Millers Falls No. 100 Automatic Push Drill w/Some Bits - Works

$19.95

Vintage Yankee Push Drill No. 41 with 7 Bits

$16.95

Vintage Millers Falls No. 188A Hand Push Drill w/6 Drill Bits Made In USA

$18.95

Vintage Millers Falls No. 430 Spiral Push Drill - Nice Uncommon Example

$69.95

Vintage Millers Falls Co. No. 185A Push Drill with 7 Bits - Made in USA

$12.98

3x5 FT Outdoor Embroidered American USA Flag Made in Luxury Embroidered Star US

$13.99

21 Mukhi Rudraksha Sacred Bead Rare- Certified A++ --IGL Lab Certified with Auth

$107.84