 |
|
Circa:
1940-50's
Price: $65.00 USD
Description: This is a nice clean 14 ounce surveyor's plumb bob with an unusually long neck (1 5/8" long straight section at top including the threaded cap). The steel tip and cap are both threaded and the threads..
|
|
|
Circa:
1923-35
Price: $85.00 USD
Description: This is a nice clean Stanley Bailey No. 5 Jack Plane. Made between 1923-1935. This plane is clean, has a nice near full length cutter, sharp and ready to work. The casting has no cracks, few scratches..
|
|
|
Circa:
1942-45
Price: $105.00 USD
Description: Offering this nice clean smooth plane marked "STANLEY MADE IN U.S.A." on the cutter, and "BAILEY NO. 4 MADE IN U.S.A." on the bed. This plane has about 97% original black Japanning intact, a good shar..
|
|
|
Circa:
1920-50's
Price: $38.00 USD
Description: This is a very nice, 1' wide x 13" long socket firmer chisel by a rarely seen Ohio tool maker! Marked "RELIANCE YOUNGSTOWN OHIO WARRANTED" on the main beam of the chisel. It has a good heavy duty thic..
|
|
|
Circa:
1922-35
Price: $75.00 USD
Description: This is a nice clean Duplex Rabbet Plane marked "STANLEY NO. 78 MADE IN U.S.A." on the main casting. This one is in good+ condition with about 85% of the original black Japanning intact. This plane is..
|
|
|
Circa:
1952-58
Price: $185.00 USD
Description: This is a nice clean rare block plane with the 1 5/8" wide cutter x 6" long. It is marked "STANLEY SW MADE IN U.S.A." on the cutter, "STANLEY" on the spring cap cover, and "STANLEY MADE IN U.S.A. No. ..
|
|
|
Circa:
early1900's
Price: $36.00 USD
Description: Offering this good useable 1' diameter auger bit, made for an old boring machine application with a set screw tightning type chuck. The shank size is 1/2" diameter. The cutting edge is sharp, a few mi..
|
|
|
Circa:
1940's-60's
Price: $45.00 USD
Description: This is an older low-angle, plane marked "Craftsman No. 3704 BB" on the outside bottom of the casting, and the cutter is marked "CRAFTSMAN MADE IN U.S.A. 107". It has an adjustable cutter depth and th..
|
|
|
Circa:
1940's
Price: $90.00 USD
Description: This is a very nice clean Stanley No. 3 smooth plane from the 40's era or a type 17 with the dark rosewood stained hardwood handles. This type has the hardwood handles that appear almost black, made t..
|
|
|
Circa:
1940-50's
Price: $62.00 USD
Description: This is a nice clean complete used duplex, filletster plane marked "CRAFTSMAN" on the cutter and "MADE IN USA" on the casting. The cutter is 1.5" wide and the plane is 10" long overall. The cutter is ..
|
