YUSUD 2 Pack Permanent Match Infinity Lighter with Multitool Keychain, Reusable For Sale

• Original Unique Design: the flint metal permanent match lighter is just an edc keychain which is great deal to play as edc survival tool which camping, hiking, backpacking and adventure outdoor.
• Widly Use Range: When you are outdoors, this permanent match will be your reliable partner. It can provide a stable source of fire when you are climbing outdoors and on the way of exploring.
• Utility Versatile: This keychain is a perfect tool as it combines utility and convenience, which making it a must-have hiking or camping gear for hunting, traveling and other outdoors activities. Works equally well even when wet or cold
• Great Gift Ideas: it is designed very elegant and fancy, packed with an elegant gift box, make it a great gift ideas on many occasions such as business gift or birthday and more
• Durable: this forever match strike lighter and adjustable cotton can endure at least 10,000 strikes. Premium quality magnesium core striker.

This permanent match lighter is a convenient EDC tool and simple to use. Durable and fuel refillable, can be used for thousands of times. With compact and lightweight design, very handy and easy to carry anywhere, anytime and any condition. Small and exquisite, convenient and easy carry every day.

WATERPROOF

High-quality aluminum alloy with leather surface. Waterproof, moisture-proof and pressure-resistant.

KEY CHAIN

Built with O ring design, you can easy attach your keys and convenient to take along with it for quick emergency access.

PREMIUM FLINT

The premium flint of the permanent match can be replaced manually and reused. Indispensable tool for outdoor camping

1. Rotate counterclockwise to open the lid and add kerosene.

2. Put the striker back to dip the oil enough.

3. Make sure you are holding the striker shaft at a 45-degree angle with the flint rod.

4. Slightly press and quickly slide the striker along the flint to the steel. Upward or downward is OK, please be careful not to hurt your finger.

1. Rotate counterclockwise to open the lid and add kerosene.

2. Put the striker back to dip the oil enough.

3. Make sure you are holding the striker shaft at a 45-degree angle with the flint rod.

4. Slightly press and quickly slide the striker along the flint to the steel. Upward or downward is OK, please be careful not to hurt your finger.

1. Rotate counterclockwise to open the lid and add kerosene.

2. Put the striker back to dip the oil enough.

3. Make sure you are holding the striker shaft at a 45-degree angle with the flint rod.

4. Slightly press and quickly slide the striker along the flint to the steel. Upward or downward is OK, please be careful not to hurt your finger.

1. Rotate counterclockwise to open the lid and add kerosene.

2. Put the striker back to dip the oil enough.

3. Make sure you are holding the striker shaft at a 45-degree angle with the flint rod.

4. Slightly press and quickly slide the striker along the flint to the steel. Upward or downward is OK, please be careful not to hurt your finger.

Don’t keep using the lighter if there is lighter fluid insufficient. If you see the flame is weak and the wick becomes difficult to be ignited, then you may need to refill it.

Do not burn the cotton core for more than 10 seconds each time. When the wick is burned to red and become short, the wick can’t absorb enough fluid so it will be difficult to ignite. Please extend or change the wick by the steps as below.

1. Pull the steel scraper out by pliers.

2. Slowly pull the wick out, stop pulling if you think it’s long enough. Please directly change the wick if it’s too short to wrap the scraper.

3. Put the scraper back to the middle of the wick, and then lightly hammer it back to the pipe.

4. The exposed part of the wick should be at least half of the length of the exposed scraper.