When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
This Supreme carburetor rebuild kit includes:
(4) Float bowl O-rings/gaskets. (Yes, they fit perfectly but are not preformed like factory)
(6) Fuel tube O-rings
(4) Air tube O-rings
(4) Drain screw O-rings
(4) Pilot screw O-rings
All O-rings are made of the upgraded Viton/FKM material.
(4) Carb mounting boots.
Fuel line
Fuel line clamps
External fuel filter
Over many, years of rebuilding and restoring Super Magna's and in particular, rebuilding Super Magna carburetors, this is the kit that I use 99% of the time and it works out fantastic.
CARB MOUNTING BOOTS
Typically, the 30 year old carb boots will split and crack when removing or installing the carbs so having a fresh set of carb boots is a must.
O-RINGS
Most often, the orings are hardened and will leak if reinstalled on the carbs but you will not know it until you have the carbs installed on the bike and the gas is turned on!
EXTERNAL FUEL FILTER (please note filter has now been upgraded as shown in the pics)
And the worst thing of all is to install your freshly cleaned carbs on the bike and then have them get completely contaminated with small debris that get by the stock, insufficient fuel screen stuck inside the fuel tank. So I always install an external fuel filter between the petcock and the automatic fuel valve that sits behind the left fake air cleaner cover mount. Included is the correct size fuel line clamps to do the job.
I'm a semi-retired mechanical engineer and have been restoring Supers and shipping parts for Supers all over the world for over 25 years. If there's anything you need for a Super, feel free to contact me.
