When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
We are a genuine UK seller with UK stock!
Check out our fantastic response on these taps. You wont find better anywhere else! We have tried several types of tap and these are the best 😊
Here at MadMopeds we don\'t just sell spares. We use these on our own bikes plus our customers machines so we know that we can sell all our parts with confidence!
This will fit your Kawasaki KH100, KH125, Z200, Z250, KZ200 or KZ250
This is a brand new reproduced fuel tap and it has the following settings... ON, OFF, RESERVE.
Note that our tap has the fuel outlet on the right side
The casting of our taps is superb and they are all checked for smooth operation before dispatch.
Please take a good look at the pictures of our taps and see if you can find better castings elsewhere!
Don\'t mess about trying to reseal your old original fuel tap. We\'ve tried all that and it just doesn\'t last. They generally leak through the front or get blocked and bunged up. Also the seal kits are expensive too if you can even find them.
Apart from that it\'s not worth wasting time even trying to fix them when you can buy something like this from us so cheaply !
OK so this tap not original Kawasaki but it is a much cheaper alternative than trying to get an original one.
Our taps are as good as you are going to buy, I\'ve searched high and low for a long time for taps for these bikes plus other classic blue smokers that are just right and these are the best!
These are probably better quality than the original parts.
We check each tap before dispatch for any casting errors and tightness of the tap.
To date, we have had no returns or issues with our supplier and manufacturer.
Fitting this will eradicate all the usual problems of old taps not working and fuel not flowing or leaking taps.
Technical specifications:
These taps are very well made with very good casting material and tolerances, they are not made from \'monkey metal\' like lots of other cheap taps are. I\'ve bought them!... and binned them!
Also they are not within the nearest 1cm etc that you may find non UK suppliers quoting!
This will be a direct fit on your bike but you may have to reroute or renew your fuel pipe.
Hole diameter is 6.5mm for your 6mm bolts
Connection to fuel line: 6mm internal diameter fuel pipe.
Taps are obviously supplied with a tank seal too.
We recommend that you fit an inline filter too.
We stock spare top filter sets and tank seals too !
Please compare yours with our pictures before purchase. Some old taps have a rear outlet. These taps are a direct replacement for all types as long as you have an oval hole in your tank
Dispatched with tracked 48 2nd Class parcel postage or select tracked 24 1st class if you want it faster for only £2 extra.
Select your postal option on purchase please.
MadMopeds UK
