2\" NPSH Heavy-Duty Industrial Fire Hose Nozzle with 2 X Aluminum 2 Inch Camlock For Sale

• ✅ EXACT SIZE -Thermoplastic 2 inch nozzle with NPSH threads attached to 2 x 2 inch aluminum female / male camlock with NPSH threads. Female 2" NPSH will only connect to a male 2" NPSH/NPT. IDM of 2" NPSH nozzle is 2.24"
• ✅ MULTIPURPOSE APPLICATION - Recommended for fire hose and fire hose racks for lined or unlined fire hose. This fire nozzle is for attaching to a fire hose and for extinguishing fires. This spray nozzle is for fire fighter fireman station, also could be for green house applications, dust suppression, and evaporate cooling
• ✅ PREMIUM MATERIAL - Polycarbonate housing for resistance to high temperature and impact. Brass stem for resistance to corrosion. Aluminum camlocks for resisting corrosion and tarnishing
• ✅ EASY TO CONTROL - By rotating to control on and off and adjust spray size, adjusts from straight stream to fog for multipurpose use. Industrial constant flow fog nozzle. Provides consistent volume at any spray angle. Capable of complete shutoff, straight stream or any degree of conical fog. Maximum 100 psi pressure (water only). Approximate gallons per minute (GPM) - 60. Approximate distance - 70 feet

◆Thermoplastic 2" NPSH nozzle attached to 2x 2" NPSH aluminum female camlock

◆Maximum operating pressure - 100psi. Approximate gallons per minute (GPM) - 60. Approximate distance - 70 feet

◆NH / NST:The most common thread type in use by fire departments today is NST or National Standard Thread. NST also goes by the initials NH or National Hose. It can even be referred to as NHT or National Hose Thread. But NST or NH is more common these days. NH = NST.

◆NPSH:National Pipe Straight Hose (NPSH) or Iron Pipe Thread (IPT) has the same threads per inch (TPI) as National Pipe Tapered (NPT) but the thread does not taper. NPSH is a straight thread and seals by a gasket in the female coupling which allows for a swivel, just like NH / NST, which make both ideal for hose couplings. Warning - It will NOT thread into a female NPT pipe. For example, a male NPSH coupling will NOT thread into a female metal or pvc pipe.

◆NPT:National Pipe Tapered is common in plumbing and some industrial uses. Sometimes referred to as pipe thread because PVC pipe and schedule 40 pipe are typically threaded in NPT. As its name implies this is a tapered thread so that the outsidediameter of the male (ODM) gets smaller towards the end of the fitting and the inside diameter of the female narrows with depth. As the two fittings are threaded together the opposite tapers force thread friction and makes the seal without the useof a gasket.

BRAND NEW ITEM... This item can not be shipped to Alaska, Guam, PO Box, FAA Address or APO, FPO Box and outside of the USA.

Return Instructions & Policies:

1. All types of returns may only be approved if the buyer contacts us within 2 days of receiving items.

2. Buyer will pay return shipping for inauthentic return reasons.

3. Returned items should be in their original form and should be boxed properly as received.

4. Refunds will be issued once we receive the item in its original form after inspection.

5. If Buyer receives a damaged item, contact us back with pictures of the damaged item within 2 days.

For Hawaii - Shipping will be 10 - 15 days

For Puerto Rico- Shipping will take at least 20 days