![](graphics/jmspacer.gif) |
|
Circa:
mid 1900's
Price: $32.00 USD
Description: Offering this new old stock 1" diameter auger bit, made for an old boring machine with a set screw tightning type chuck. The shank size is 23/64" diameter / .34 across the flats in three places. It is..
|
![](graphics/jmspacer.gif) |
|
Circa:
late 1800's
Price: $75.00 USD
Description: This is a really nice, 6" wide hand adze marked "J S". I am not sure of the maker. This adze weighes 3 pounds and the cutting edge is nearly flat, but I refer to the shape of it as a very mild sweep, ..
|
![](graphics/jmspacer.gif) |
|
Circa:
1870's
Price: $75.00 USD
Description: This is a nice clean extra heavy duty 1" wide x 15.5" long socket firmer chisel marked "UNION HARDWARE COMPANY TORRINGTON CONN. U.S.A." on the steel. This is a good quality chisel, that has a good sha..
|
![](graphics/jmspacer.gif) |
|
Circa:
1950-60's
Price: $35.00 USD
Description: This is a very nice, vintage, quality made 16" steel back saw, though used has been resharpened and is ready to go to work! It is marked "CRAFTSMAN REG. TRADE MARK SPECIAL SAW STEEL NO. 9-3619-AL 11 P..
|
![](graphics/jmspacer.gif) |
|
Circa:
1900-30's
Price: $80.00 USD
Description: This is a nice clean vintage set of brace type auger bits, the set includes 13 bits from 4/16ths to 16/16ths, all in good working order. There is some minor dings and wear, and other drills are like n..
|
![](graphics/jmspacer.gif) |
|
Circa:
late 1800's
Price: $75.00 USD
Description: Offering this nice hard to find patent adjustable screw holding screwdriver in good condition. It is marked C.A. MANN & CO. BUFFALO N.Y. PAT'D MAY 16 1889 JUNE 15 1899" on the main shaft. The jaws t..
|
![](graphics/jmspacer.gif) |
|
Circa:
1920-40's
Price: $35.00 USD
Description: Offering this nice hard to find mechanic, or machinist's heavy duty screwdriver marked "COPA", inside and interesting logo on the wood handle steel furrule. It measure 9.5" long and has a .50" wide b..
|
![](graphics/jmspacer.gif) |
|
Circa:
1920-30's
Price: $75.00 USD
Description: This is a nice, clean set of 11 Irwin single spiral auger bits for your brace, 13 total with the No. 4/16ths and 5/16ths with the double lip/spur. All 13 are marked "IRWIN" on them, and all have a siz..
|
![](graphics/jmspacer.gif) |
|
Circa:
1920-50's
Price: $35.00 USD
Description: This is a good quality made socket firmer chisel that is marked "GREENLEE ROCKFORD ILLOIS MADE IN U.S.A." on the steel (lightly), inside the Greenlee logo. It has a good solid hardwood hard maple hand..
|
![](graphics/jmspacer.gif) |
|
Circa:
early 1900's
Price: $75.00 USD
Description: This is a top quality laminated steel, framing chisel marked "T.H. WITHERBY CAST STEEL" on the steel. It measures 18.1" long x .75" wide. The laminated steel goes back about 4" from the cutting edge..
|