 |
|
Circa:
1920's-30's
Price: $6.00 USD
Description: This is a nice new old stock 9/32" (.28") diameter German style brace auger bit. These were made by "THE JAMES SWAN CO. SEYMOUR CONN. U.S.A." as we have the original wood box with the blue label you ..
|
|
|
Circa:
1930's-50's
Price: $22.00 USD
Description: This is a nice quality, 1" wide x 10" long beveled socket chisel. It's marked "BUCK CAST" and we can see the Buck logo on the steel. The mark is unevenly struck, and should read B..
|
|
|
Circa:
1930's-50's
Price: $18.00 USD
Description: This is a nice clean .25" (1/4") wide socket mortise chisel marked "C..... CHAMPION" on the steel. There is two names, the top name begins with a C, but we can't make out what the first or top name i..
|
|
|
Circa:
Mid-1900's
Price: $24.00 USD
Description: This is a very clean vintage Stanley block plane dating back to around 1940's. It is clean with about 95% of it's original black paint intact. This one is marked "STANLEY MADE IN U.S.A. NO. 220&q..
|
|
|
Circa:
Late 1800's-Early 1900's
Price: $42.00 USD
Description: This is a very nice clean 4" blade or cutting edge width, Jennings & Co. draw knife. It is not marked by the maker, but is of the same design and quality. As you can see it has black painted ha..
|
|
|
Circa:
1980's
Price: $8.00 USD
Description: This is a very nice used original speed square marked "SWANSON SPEED SQUARE". We checked it against a precision square and it still looks good in terms of squareness! The aluminum has some f..
|
|
|
Circa:
Late 1800's-Early 1900's
Price: $40.00 USD
Description: This is a very nice, hard to find antique .87" socket firmer chisel marked "SAMSON UNION HARDWARE COMPANY TORRINGTON CONN. U.S.A.". The steel section of this chisel alone is 10.75" ..
|
|
|
Circa:
Late 1800's-Early 1900's
Price: $42.00 USD
Description: This is a very nice, hard to find antique 1" socket firmer chisel marked "WINSTED EDGE TOOL WORKS WINSTED CONN. U.S.A.". The steel section of this chisel alone is 10.75" long x 1.0..
|
|
|
Circa:
Mid-1900's
Price: $28.00 USD
Description: This is a very nice, hard to find 5/32" socket firmer chisel marked "VAN CAMP". The steel section of this chisel alone is 7.75" long x .15" width. Van Camp was a well known quality..
|
|
|
Circa:
Late 1800's
Price: $26.00 USD
Description: This is a very nice, hard to find 1/2" socket firmer chisel marked "SAMSON UNION HARDWARE COMPANY TORRINGTON CONN. U.S.A." a toolmaker in the late 1800's. The steel section of this chisel al..
|
