When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Buy it now! High quality embroidered patch. These patches measure approximately 1” x 5“. Take your gear to the next level and put your custom touches on with one of these!
To apply:
1. Set your iron to its highest heat setting.
2. On a hard surface, position your patch.
3. Place a pressing cloth (you can use a cotton pillowcase or handkerchief) between the patch and the iron. Press the iron downward and hold it in place firmly for 1-3 minutes (iron quality varies).
4. Once the patch is affixed to the fabric, turn the item of clothing inside out and lay it flat on your ironing board. Position the pressing cloth over the reverse side of the patch and repeat step three. After repeating step three, work your iron around the edge of the patch, pressing firmly and lifting before moving. Once the patch is securely attached to the garment, allow it to cool completely before wearing.
NOT SO FINE PRINT!
Please check the item you are applying the patch to for heat resistance. Iron-on patches work best with materials like cotton and polyester but can seriously damage fabrics like nylon, or rayon. ***Also sewing combined with ironing is the most permanent way to attach an emblem.***
Thanks
