Licence Plate Frame Holder,Practical No Drill Front License Plate Bracket for... For Sale

FRONT LICENSE PLATE HOLDER KIT, THE COMPLETE SET OF MOUNTING FOR LICENSE PLATE MOUNTING, YOU DESERVE IT

Product Attributes

Colors: Black

Sizes: 12.04*6.02*0.57 inch

Weight: 8.03 oz

Material: Stainless Steel, ABS

Packaging:

1* License Plate Frame

1* License Plate Holder

4* Zip Ties

6* Screws

1* Hexagonal Wrench

6* Gaskets

8* Sponge Pad

4* Plastic Top Buckle

4* Plastic Bottom Buckle

4* Nylon Inserts

Product Functions & Features

1. Our license plate holder front bumper can firmly fix the license plate, well fixed, not easy to come loose

2. are complete! Our front license plate holder include a complete set of mounting , so you don\'t need to buy additional mounting

3. Easy to install, no drilling is required, just tighten the screws in the corresponding holes to complete the installation

Easy to Install

1. Align and place the license plate bracket in front of the car

2. Use cable ties or long screws to secure the license plate to the front of the car

3. Place the license plate and license plate frame, align each mounting hole, and secure them with short screws and washers

4. Finally install the screw cover

5. Installation complete

License Plate Fixing: Our license plate holder provides and positioning for the license plate, allowing the plate to be mounted in the required position, fixing it well, making it less likely to come loose, and also keeping the plate clean
Complete Accessorie: Our front license plate bracket kit includes 1 license plate frame, 1 license plate bracket, 6 screws, 4 tie wraps and some other necessary mounting , please check the quantity carefully after receiving the package
Excellent Material: The license plate mount is made of ABS with excellent toughness to resist impacts, and the license plate bracket is made of stainless steel with a certain degree of hardness, not easy to deform and can be used for a long time
Easy to Install: 1. Secure to the grille with screws; use zip ties if no holes exist. 2. Insert plate into frame; align with bracket holes. (Optional: Anti-vibration pads) 3. Thread washers, bases & short screws through, then tighten the Allen key. 4. Snap on black decorative caps for a clean, sleek look
Wide Range of Use: Our front license plate holder is widely with standard 12×6 inch license plate, suitable for all kinds of vehicles, meets the license plate specifications, please check whether your car meets the standard before purchase