Anti-thermal imaging (anti-drone) raincoat, tactical ponchoю🇺🇦 For Sale

The raincoat (raincoat) poncho anti-thermal imager is made taking into account the modern needs of our military. The front and back of the raincoat are made of raincoat fabric, in the middle a special laminated (aluminum fabric) is sewn in, reinforced with reinforcement. The inside is a breathable membrane, for greater comfort. The size of the poncho with a hood when unfolded is 150*300 cm, the length of the raincoat is 150 cm. There are special holes for the hands on the sides and in the middle for convenience. The side holes are fixed with Velcro. Advantages: • Raincoat as protection from thermal imaging, not penetrated by thermal imaging from a working distance (tested with a thermal imaging scope) • Ideal for masking from a thermal imaging camera at a distance of 100 meters (in winter at lower temperatures it will work from a distance of 30 meters, but in summer it is better not to use closer than 100 meters). • Loosely fits the body, so it does not heat up quickly on a warm night (this is achieved by sewing in three loosely connected layers, the design of the poncho itself additionally works, air movement is ensured). • Complete protection from rain, does not let wind and moisture through. • Tear-resistant due to the reinforcement of the laminated layer, unlike conventional foil, which is damaged under almost any load. • Takes up little space when folded, comes with a cover for storage and transportation. There is a small drawback, rustling when putting on or quickly movement. ALWAYS wear a poncho over your helmet, body armor, and BC. In the summer, be sure to keep the sides open.