When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Lamp Filling instructions at the bottom of the page. 48 ounces in total.PLEASE NOTE: This may ship in plain recycled spring water bottles asshownin the photos or other recycled bottles with no label depending on what bottles are in stock.
In this listing, you may choose from the following colors:
Clear, red, blue, green, orange, purple, smoke (translucent black), coral or yellow.
In my OTHER listings, I offer black light reactive colors:Clear electric blue (clear in normal light, a dazzling electric/sky blue under a strong UV black light), UV Hot Pink, and UV Blue (More of a turquoise).
Add a "Note to Seller during Checkout, otherwise you will receive clear by default.
We recommend a 60-100W UV LED Flood Panel which can be found here on for minimal cost. Check out the instructions for adding the oil below.The colored oil will be a transparent tint when in drop form and not deeply saturated like it is in the bottle.
Note: Packaging may vary as shown in photos. So there is noconfusionthis may ship in recycled spring water bottles, Gatorade bottles, or one gallonjugsdepending on what isavailableor the size of the order.No need for fancy packaging when you know what you have is the BEST. :)
If you love this kind of décor, be sure to check out my other account for the custom Made In The USAHughes Wave Motion Machine. (If you know rain/Lava/motion lamps, you remember these).
🌊CLICK HERE to see the most relaxing piece of Home Decor since 1968- The "Model One" Wave Motion Machine!🌊
💧Buy 64 Ounces Of Rain Lamp Oil At A Discount Here!💧
Video of this oil in action. Look at those raindrops!
Vintage Rain Lamp Restoration by Hughes Wave Motion Machines - YouTube
Video will open in a new window
Using the App? Paste link into a browser window
NOTE: Beware of sellers trying to rip you off with thin, runny, splashing, drug store baby oil listed as Drakeol 35! I recently purchased oil from two other “unnamed” sellers on and tested the oil with a device that measures viscosity and density and lo and behold, they are selling plain old drug store mineral oil. This oil is not meant for your rain lamp and doesn’t make droplets but rather runs down the strings and splashes because it is so thin. Read below, check my response on this oil and buy with confidence that you are putting the original in your beloved vintage rain lamp!
This oil is specifically produced for use in all sizes of vintage rain drip lamps from the 60's and 70's. Itproduces the realistic "rainfall effect" you remember from when you first saw an oil rain lamp. Beware of other sellers here on attempting to capitalize on the success of this oil by selling plain old baby oil from the drug store at a huge markup! Regular mineral oil does not createbeautifulindividual drops of "rain" on the lines and it runs so fast it can sometime splash out of the basin, making a mess! Most large rain lamps that are 20"-27" tall require about 32 ounces. It is the buyer's responsibility to refer to the instruction manual for their specific machine to determine the amount of oil required. This amount is a general figurefor MOST lamps. sale is for OIL ONLY. No lamp included.
The instructions to add the oil are quite simple:
1. Place plastic sheeting under your work area and cover it with newspaper. Keep paper towels handy in case of spills and drips.
2. Turn on the rain lamp.
3. Use a paper towel to gently wipe oil from the fishing strands where you will be working. Locate the holes in the bottom pan of the cage under the foliage and statue. There is not a specific oil fill hole. The oil will find its way through the same holes that collects oil drips from the fishing line strands. The collection basin is under the cage where the oil collects and is pumped to the top of the lamp.
4. Slowly pour the first pint of oil into the bottom of the cage under the foliage.
5. Wait five minutes for the rain effect to start and listen for a change in the sound of the pump.
6. Add another half pint of oil if the rain has not started or there is no change in the sound of the pump.
7. Wait five minutes and repeat pouring a half pint of oil at a time until the rain looks normal and the pump sounds somewhat muted.
8. Expect to pour at least one pint of oil but no more than three pints. Stop adding oil when the raining effect looks normal. Do not use too much oil, because it can overwhelm the pump.
NOTE: The lamp needs to be on a level surface.If you add too much oil, you will saturate the electrical mechanism and the pump will not function properly so that the oil never reaches the top. If this occurs, remove some of the oil by removing the three nuts that bolt the metal base tray down at the bottom and remove some oil. Only the impeller of the pump should be submerged in the oil.
