When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Looking for an easy way to pull your civilian 12v trailer behind your 24v military truck without splicing wires? You have found the solution.
Features
• 12 Volts @ 20 Amps (240 watts lighting power)
• Surge Suppression
• Overload Protection
• Automatic Reset
• Water-proof
• Plug & Play (no wire cutting or splicing)
Compatibility
• 3 Lever or Push Button Light Switch
• \"Service Drive” and “Park” modes
How It Works
Takes power from the tail light circuit, wire #21, and converts it to 12 volts. That 12 volt power is fed into relays that are triggered by wires# 22-460 and 22-461, the left and right stop/turn circuits. The 12 volts from the power converter and relays are fed to a civilian trailer connector. The tractor versions have additional relays that provide separate turn and stop lighting circuits for semi trailers.
A note about power
The adapter will supply a total of 20 amps (240 watts) for trailer lighting. The standard 12 volt 1157 taillight bulb draws 26 watts for stop/turn and 8 watts for tail. A typical trailer setup of two stop/turn/tail light bulbs (one per side) with running lights on and brakes applied will use 68 watts, leaving 172 watts for marker lights (they tend to be 8 watts or less, so at least enough power for 20 of them). Or a ridiculous number of LED lamps. A load of greater than 240 watts will overload the converter and cause it to shutdown. The converter will auto-reset once the overload is cleared.
This particular sale is for a 7 way RV & 4 way flat connector on trailer end. 12 Pin nato for truck end. We have multiple options- 7 way J560 semi trailer, etc. Call us with Q Jim 5076762972 to ensure we get you the correct convertor for you application. This is a plug and play box that plugs into your military trailer plug. You then will plug your trailer wiring harness plug into the convertor box for easy 12v trailer lighting. Made in USA. 12volt at 20 amps (240 watts lighting power) , surge protection, automatic reset and waterproof. Works with both the traditional 3 way light switch and also the push button light switch. 7 way RV style trailer connector. Cable that plugs into military light receptacle is nato style 12 pin and is 6ft long. If you need specialized trailer converters, have questions or need Parts for your military 6x6 truck please reach out to us! Army 6x6 LLC. Shipping price listed is for continental US only. If for export please email us for shipping quote.
